background image

The information furnished in this manual does not include all of the details of design and engineering of 
this particular product; not does it cover every possible application or situation concerning its usage, 
which may occur during the installation, operation or maintenance of said  DSC24  product.

IMPORTANT

THE  PRODUCT REQUIRES

CLASS 2 OUTPUT WIRING.

TO PREVENT ELECTRIC SHOCK, DO NOT  
REMOVE TOP OR  BOTTOM COVERS.   NO 
USER SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE 
PERSONNEL. DISCONNECT POWER CORD 
BEFORE REMOVING REAR PANEL COVER 
TO ACCESS GAIN SWITCH.

Shock Hazard - Do Not Enter
Choc Hasard - N*entrent
Schocke Hazard - Test Nicht 
                              Betrete
Urto Hazard - Do  Non Entrano

WARNING

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE!

The exclamation point triangle is used 
to alert the user to important operating 
and/or maintenance instructions.

Printed on 
recycled paper.

CAUTION

Magnetic Field

CAUTION:

 Do not locate sensitive high-gain equipment such as preamplifiers or tape decks 

directly above or below this unit. Because this amplifier has a high power density, it has a 
strong magnetic field which can induce hum into unshielded devices that are located nearby. 
This field is strongest just above and below the unit. If an equipment rack is used, we 
recommend locating the amplifier(s) at the bottom of the rack and the preamplifier or other 
sensitive equipment at the top.

The lightning bolt triangle is 
used alert the user to the risk 
of electric shock.

Page 2

Page 15

User's Manual

User's Manual

FEATURES:
Inputs 
* 2 x XLR IN, electronically balanced
* Input voltage (MAX) 7.55 V / + 20dBu
* 6 bands parametric equalizers, 16 shelving equalizer
* 6 bands Low-Shelving equalizer, Hi-Shelving equalizer
* Input impedance 20 kohms
* Common mode rejection > 70 dB (1kHz)
* AD-conversion 24-bit, Sigma-Delta, 128 times oversampling, linear phase

Outputs
* 4 x XLR OUT, electronically balanced 
* Output voltage (MAX) 7.55 V / + 20dBu
* 6 bands parametric equalizers, 16 shelving equalizer
* 6 bands Low-Shelving equalizer, Hi-Shelving equalizer
* Output impedance < 100 ohms
* Min. load impedance 600 ohms
* DA-conversion 24-bit, Sigma-Delta, 128 times oversampling 
* Frequency response 20 Hz - 20 kHz (- 0.5 dB)
* S/N ratio 110 dB (typical)
* Distortion < 0.01 %

4.   Technical Specifications

DSC24

DSC24

Summary of Contents for DSC24











Reviews: