28
- Press the
WIND/+
and
PRESSURE/-
key to adjust values.
- Press the
SET
key to confirm & move to the next item.
- Press the
ALARM
key to reset any adjusted value.
- Press the
LIGHT /SNOOZE
key at any time to exit.
6.7.1 Calibration Order:
1.
Indoor temperature offset calibrated (range +/-5˚C, default: 0 degrees)
2.
Indoor humidity offset calibrated (range +/-10%)
3.
Outdoor temperature offset calibrated (range +/-5˚C, default: 0 degrees)
4.
Outdoor humidity offset calibrated (range +/-10%)
5.
Absolute pressure offset calibrated (range +/-50hpa)
6.
Wind direction offset calibrated (adjust by degree)
7.
Wind speed factor adjust, default 100% (range 50% to 150%)
8.
Rain factor adjust, default 100% (range 50% to 150%)
9.
Light factor adjust, default 100% (range 30% to 250%)
10.
UVI factor adjust, default 100% (range 30% to 250%)
6.8
Other Features
6.8.1
Factory Reset/Clear Memory
To restore the console to factory default, perform the following steps:
1. Remove the power from the console by removing the batteries and
disconnecting the AC adapter.
2. Apply power by connecting the AC adapter.
3. Wait for all of the segments to appear on the screen,.
4. Press and hold the
WIND/+
and
PRESSURE/-
keys at the same time until
the console power up sequence is complete (about 5 seconds).
5. Replace the batteries.
6.8.2
Register New Transmitter
Press and hold the
LIGHT /SNOOZE
button for 5 seconds, and the console will
re-register the wireless sensor.
