Harvy200
Version 2.1 - 2019
Page 17 of 18
6
Harvesting
Place the Harvy200 between the rows of berry bushes, in such a manner that one row of berry
bushes is situated between the collection trays of the Harvy200 (Figure 5.1).
Place a stock of empty crates on the crate racks and place two empty crates at the bottom of every
collection tray.
Make sure the empty crates on the crate racks are stacked neatly in order to prevent
the pile from tipping over.
Push the collection trays towards the berry bushes so the brushes enclose the bushes.
Shake the berry bushes so that all berries of the bush fall into the collection trays and end up in the
empty crates that are located at the bottom of the collection trays.
It is not allowed to stand on or to sit down on the collection trays.
Move the Harvy200 to the next bushes once all berries have been removed from the bush.
As soon as the crates at the bottom of the collection tray are full, the collection tray can be pulled
backwards in order to easily replace the full crates by empty crates.
Move the collection trays forwards or backwards by grabbing the upper edge of the collection tray.
Never pull the collection trays backwards by grabbing the sheet metal strips used to
fasten the collection trays in a hinged manner.
7
Maintenance
Regularly check whether the fastening screws of the base frame and the collection trays are
tightened securely.
Clean the Harvy200 regularly.
