Harvy200
Version 2.1 - 2019
Page 15 of 18
Adjustment
In order to ensure that no berries are lost during the harvest, the brushes mounted onto the
collection trays have to enclose the brushes below the lower braches, such as displayed in Figure
5.2. The Harvy200 is adjustable at several points.
After a setting has been altered, always check whether all fastening screws have been
tightened securely.
5.1
Adjust the width
The left part and the right part of the base frame are connected with each other by means of a
connecting tube. As a result, the width of the Harvy200 can be easily adjusted to the distance
between the rows of berry bushes on the field. By loosening the bolts for the width adjustment (see
Figure 5.1) and moving one side of the Harvy200, the width can be adjusted.
Never make the base frame wider than 3 metres. The connecting tube contains a
marking indicating the middle of the connecting tube.
Figure 5.1 Setup Harvy200
5.2
Adjust the height of the collection tray
The position of the collection tray is adjustable in height. Both collection trays are attached on both
sides to the base frame by means of a clamping bracket (see Figure 5.2). By loosening the bolts of
both clamps, the collection tray can be adjusted in height.
Make sure the collection tray is supported and cannot fall down, prior to loosening the
bolts of the clamps!
5.3
Adjust the angle of the brushes
The angle of the brushes is adjustable. By loosening the star-knob (see Figure 5.2) on both sides of
the collection tray, the angle of the brushes can be adjusted manually.
Width adjustment
Berry bushes
