2
-
FROST PROTECTION function
After setting the Summer or Winter mode, pressing
OK
the display will show
the following screen.
With the keys
it is possible to set the desired value, between 2°C
and 8°C. Press
OK
to confirm and proceed to the next menu.
To exit, press the key
for 3 seconds or press
OK
repeatedly until the
message OFF appears on the screen.
If something has been changed, 3 beeps will confirm the successful change.
3
-
ON/OFF HYSTERESIS
After confirming with the key
OK
the desired value of the frost protection,
the display will show the following screen.
Using keys
it is possible to set the value of the ON/OFF Hysteresis
between 0.1 and 0.9.
Confirm with the
OK
key and proceed to the next menu.
To exit, press the key
for 3 seconds or press
OK
repeatedly until the
message OFF appears on the screen; if something has been changed,
3 beeps will confirm the successful change.
4
-
ANTI-SEIZE PUMP function
After programming the ON/OFF Hysteresis, press
OK
to display the following
screen
(
anti-seize function OFF
)
53
Summary of Contents for 1C Series
Page 1: ...1C 61 SLIDER CHRONOTHERMOSTAT...
Page 4: ...35...
Page 6: ...1 2 fig 1 fig 2 37...
Page 32: ...IB1C61002 07 19 Finder S p A con unico socio 10040 ALMESE TO ITALY...
