When pairing has not been successfully completed (Reset Method):
1. Insert the left and right earphones into an adequately charged charging case and press the MFB
button on both sides simultaneously for 10 or more seconds and the LED indicator will first turn
off, then light up in orange.
To reestablish pairing or to perform pairing with a second or later device:
1. Remove the earphones from the charging case and the LED indicator will light up white for 1
second as the power automatically switches ON.
2. Press the MFB button on one side of the earphones to switch to pairing mode. (LED indicator
flashes between orange and white.)
3. Switch the Bluetooth function on the smartphone or other device ON, and select either
[EVATW01_L] or [EVATW01_R] *2 once it appears on the display.
4. A [Bluetooth Pairing Request] from the other side earphone will appear on the display, so please
select [Pairing] or [OK]. (Varies depending on the smartphone or other device to which it is
being connected.) Left and right pairing has been completed when any of the messages below
have been displayed.
*2: In the case of EVATW02, either [EVATW02_L] or [EVATW02_R]; in the case of EVATW06, either
[EVATW06_L] or [EVATW06_R] is displayed.
* If Connected is displayed for either side, pairing has succeeded.
* The side for which connected is displayed is the parent earphone.
* Before performing pairing with a new device, please disconnect the device to which it has
already been paired or switch the Bluetooth function OFF on the device to which it has
already been paired.
Music
Incoming Calls
Siri/
Google Assistant
Playback
Pause
Next Track
Previous Track
Raise Sound Volume
Lower Sound Volume
Receive Call
End Call
Refuse Call
Initialize
Press Once
Press Once
Press Once
Press Once or insert into charging case
Press Twice
Press Twice (Parent earphone, only while music is stopped)
*
* Depending on the device to which connected, this function may not be available.
Press until beep sound
emanates once, then release
Press until beep sound
emanates once, then release
Press Twice
Press Twice
2. Next, remove the left and right earphones, and the LED indicator will flash white as pairing is
performed between the left and right earphones.
3. After a certain amount of time, the earphones will automatically switch to pairing mode with the
smartphone or other device. In this situation, the reset has been completed. Once the reset has
been completed, please attempt another pairing operation.
Performing device pairing
Performing device pairing
Operation of the MFB Button
EVATW01_L
EVATW01
EVATW01_R
Connected
Not connected
EVATW02_L
EVATW02
EVATW02_R
Connected
Not connected
EVATW06_L
EVATW06
EVATW06_R
Connected
Not connected
6
7
