Safety Protection
Failsafe Return
Failsafe return is only supported in GPS mode. When the GPS signal is
good, the compass is working normally and the drone records the return
point successfully, if the wireless signal of the drone and the remote controller
is interrupted over 2 seconds , the flight control system will take over the
control of the drone and plan the return route according to the original flight
path, and the drone will fly back to the return point. If the drone and the
wireless remote controller signal is reconnected in the return process, the
user can turn off App return hint or re-toggle the auto return switching to
flight mode to cancel, and the drone will hover at the current position.
home point
home point
current altitude≥return altitude
ascend first
( the default altitude is 30m)
current altitude<return altitude
Low-power Protection
In flight, when the battery level is only enough for RTH, App advises users
to return, and the drone will return automatically after 10 seconds countdown.
When the battery level is only enough for landing, App advises users to land
as soon as possible, and the drone will land automatically after 10 seconds
countdown. When the battery level is at 10% usage left, the drone will be
forced to land.
Hovering on the Edge of No-fly-zone
The drone will automatically hover in the restricted flight area designated by
the state, such as the edge of airports, and the App will appear corresponding
hints. The user can use sticks to control the drone to evacuate from the edge
of no-fly-zone, but sticks cannot control the drone to fly into the no-fly-zone.
critical low battery
landing battery level
normal battery level
low battery
current battery level
RTH battery level
15%
10%
0%
30%
100%
hover
No-fly-zone
Summary of Contents for FMWRJ02A5
Page 2: ...V1 0 ...
