FIMI A3, User Manual

Page: 11 / 26

Headless mode
The aircraft will take the current nose direction as the forward direction. During the
flight, even if the nose direction of the aircraft changes, the forward direction will
remain unchanged, so the user can adjust the shooting angle. Shortly press return
key to exit headless mode.
Around-point flying
The user can select around-point flying on the remote controller menu. Before the
around-point flying, please select the interest point first. After the selection, click
the around-point flying to execute the command. Shortly press the return key to exit
around-point flying.
Users can freely control the radius, height and speed of flying around point
through the stick , as shown below.
Note: When the aircraft's tail is pointed toward the remote controller, the left stick
is adjusted to the same direction as the American hand. Therefore, the user
should be careful when adjusting the course of around-point flying to avoid the
backswing, which will result in flight accidents.
Left stick
Right stick
Push up
Pull down
Push up
Pull down
Turn left
Turn right
Increase the altitude of around-point flying
Reduce the altitude of around-point flying
Increase the radius of around-point flying
Reduce the radius of around-point flying
Increase the speed of around-point flying
Reduce the speed of around-point flying
Following flying
Following flying is supported only in GPS mode and SPORT mode. Only when the
aircraft and the remote controllerhave six satellites or more can it start following flying.
If the condition is not met, the remote controller indicates that the current GPS
signal is poor and the intelligent flying cannot be started. Users can choose the
following flying in the remote controller menu and set the distance and height between
the aircraft and people. The aircraft will take the remote controller as tracking target.
Shortly press return key to exit following flying.
Note: During the following flying of the aircraft, users should always make sure to
avoid people, animals and obstacles in the tracking path to ensure the safety of
the flying. Users should comply with local laws and regulations when using the
function of following flying.
Self-timer flying
Before self-timer flying, please adjust the posture of the aircraft so that the target is
in the middle of the picture. After adjusting the pitch angle of the cradle head , select
self-timer flying in the menu of the remote controller. The aircraft will reverse along the
pitch angle of the cradle head at a certain speed until the direct distance between
the aircraft and the target reaches 150 meters or the flight height reaches 120 meters.
At the end of the self-timer flying, the aircraft will automatically return to the starting
point. In the process of self-timer flying, shortly press the "Return" button to exit the
self-timer flying and the aircraft will automatically return to the starting point.