Fimet F1, User Manual

Page: 39 / 59

User Guide • 39
Suction systems must be disinfected or flushed. To disinfect the suction system:

Insert the suction hoses to the holes in the side of the cuspidor.

Pour the disinfectant liquid into the filling hole. Find the location of the container of the
flushing liquid from the pictures of chapter 2.2 System Overview.

Wait until the disinfectant liquid has been sucked out.

Return the suction hoses to their original positions.
Wipe the exterior surfaces of the hoses with a disinfectant.
If the cuspidor bowl has been used, it should be cleaned with a suitable solution.
Disinfecting waterlines daily is highly recommended.
At the end of the day, clean all the surfaces where contamination from secretion is possi-
ble using a disinfectant liquid. Clean other surfaces with a suitable detergent.
3.1.4 Weekly
Clean and disinfect the suction system.
Artificial leather and genuine leather surfaces must be cleaned with a suitable solution
(see
3.1.8 Artificial Leather
and
3.1.9 Leather
).
Waterlines must be disinfected.
All surfaces should be cleaned with a suitable detergent/disinfectant.
At the start of work week, let water flow through the instruments for at least 10 minutes
before starting treatment.
3.1.5 Display
Use cleaning solutions designed for cleaning the displays. To disinfect the display, alcohol
based solutions can be used. See the display’s user guide for detailed instructions on how
to clean and disinfect the display.
3.1.6 Operating Light
See the operating light’s user guide for instructions on cleaning the light.
3.1.7 Secretion Stains
All the stains from secretion should be cleaned immediately after the treatment of the pa-
tient has finished (chloride-based solutions are suggested, concentration at least 1000
ppm or 1‰).
3.1.8 Artificial Leather and Textile
To clean artificial leather and textile surfaces it is suggested to use mildly alkaline (pH 8-
10) cleaning solutions. Using alcohol-based solution to disinfect the artificial leather or tex-
tile is not suggested, because it may make the material more brittle.
3.1.9 Leather
To clean genuine leather surfaces, it is suggested to use soap-based cleaning agents that
especially intended for cleaning leather surfaces. Do not use acidic or alkaline solutions.
3.1.10 Waxing
Waxing the painted surfaces at least once a year is recommended to keep the surfaces
easy to clean. Common car waxes can be used.