Fimer R25 Series, User Manual

Page: 3 / 16

________________________________________________________________________________
_______________________________________________________________________________
1
Environmental Statement
The grid connected PV inverter of Fimer reduce raw material consumption and scrap throughout their long working
lifetime. In typical applications, these positive environmental effects far outweigh the negative impacts of product
manufacture and end-of-life disposal.
Product packaging is of good quality and can be re-used. All the products come in strong cardboard cartons which
themselves have a high recycled fibre content. If not re-used, these containers can be recycled. Polythene, used on the
protective film and bags from wrapping product, can be recycled in the same way. Fimer’s packaging strategy favours
easily recyclable materials of low environmental impact, and regular reviews identify opportunities for improvement.
Copyright– All rights reserved
This publication is property of Fimer S.p.A. Any divulgation or reproduction of it as a whole or in part in forbidden
unless expressly authorised. The contents, pictures and texts can be use for training the installers and the end users of
the product. This manual cannot be used any other scope different from the user instruction necessary to install, control
and run the solar inverter. While every care has been taken during the preparation, the compilation and checking to
ensure the accuracy of the information contained in this manual, Fimer S.p.A. cannot assume any responsibility for
events caused by improper use of the same. The same statement is made on behalf of all persons and companies
involved in the creation and the production of this manual. Fimer S.p.A. reserves the right to make design or functional
modifications, without prior notice and at any time; picture are just an example
.
_____________________________________________________
INDEX
PREFACE .................................................................................................................................................................... 2
INTRODUCTION ....................................................................................................................................................... 3
A
CCESSORIES NECESSARY FOR INSTALLING THE
GSM
MODEM
.................................................................................... 3
P
REREQUISITES FOR USING A
GSM
MODEM
.................................................................................................................. 4
C
ONNECTING THE
I
NTERNAL
M
ODEM
........................................................................................................................... 4
I
NSTALLING THE
M
ODEM
O
PTION
C
ARD INSIDE THE SLOT OF THE
I
NVERTER
............................................................... 4
C
ONNECTING AN
E
XTERNAL
GSM B
OX TO THE INVERTER
........................................................................................... 6
S
ETTING THE
M
ODEM
F
UNCTIONS AT THE
I
NVERTER
................................................................................................... 6
U
SER
I
NTERFACE
.......................................................................................................................................................... 7
F
AULT
A
NALYSIS
.......................................................................................................................................................... 8