EN
30
4. Lifting and transport
4.1 Transport and handling
Transport of the equipment, especially by road, must be carried out with means for protecting the components (in particular, the electronic
components) from violent shocks, humidity, vibration, etc.
During handling, do not make any sudden or fast movements that could create dangerous swinging.
4.2 Equipment weight
Device
Weight
(kg/lb)
Lifting
points
Holes for handles (optional) or
Eyebolts (not supplied)
PVS-10/12.5/15-TL
29.6 Kg / 65lb
2
M8. Kit of handles
(25)
(to be ordered)
4.3 Storage
ATTENTION –
A
DO NOT store the equipment (also valid for spare parts units) in a location exposed to severe weather conditions
(e.g. rain, snow or a high level of humidity). Always comply with storage temperature indicated in
paragraph in
this manual.
If the package is stored correctly, it can withstand a maximum load of 5 stacked units.
ATTENTION –
A
DO NOT stack the package with equipment or products other than those
indicated.
ATTENTION –
A
Accessory components that are in separate packages can be piled
separately.
4.3.1 Unpacking and checking
ATTENTION –
A
Packaging elements (cardboard, cellophane, staples, adhesive tape, straps, etc.) may cause cuts and/or injuries if
not handled with care. They should be removed with the proper equipment.
NOTE –
D
The components of the packaging must be disposed in accordance with the regulations in force in the country of installation.
When you open an equipment package, check that the equipment is undamaged and make sure all the components are present.
NOTE –
D
If any defects or damage are found, stop unpacking and consult the carrier, and also promptly inform FIMER customer
support.