Page 2
Step 1: Slide hitch adapters over
axle.
Step 2: Assemble formed hitch
plate on the square tongue tubes,
using two carriage bolts and whiz
nuts.
Step 3: Attach formed hitch
bracket to mounting plate
using hex bolts and whiz
nuts.
Step 4: Slide tongue
hitch arms into hitch
adapters and pin in
place.
Step 5: Attach scraper bar using hex bolts and whiz nuts.
Step 6: Adjust both
plugs by turning
handle. Secure plug
in place by folding the
plug handle down.
Assembly Instructions
Remove the parts to the unit from the carton. Refer to exploded view and parts list to help identify the parts.
Operating Instructions
Fill roller by removing top drain plug and fill with liquid or sand, not to exceed towing vehicle towing limit. Know the towing capacity of
the vehicle used for towing your lawn roller. Do not fill lawn roller to full capacity if it will exceed the weight your towing vehicle can
safely pull and stop.
Avoid making sharp turns, as you may damage your ground or create unsafe operating conditions. Follow the slope of the terrain;
avoid direct paths up and down steep slopes. Always completely drain all water from roller before freezing temperatures are
predicted.
