Fimap MY50, Use And Maintenance Manual, Page: 21 / 36

21
DAILY MAINTENANCE
PERFORM ALL MAINTENANCE OPERATIONS IN SEQUENCE
26. CLEANING THE DIRTY WATER RECOVERY TANK
1. Disconnect the tube (1) from its seat, unscrew the drainage cap, and empty the dirty water
recovery tank
2. Remove the cover from the dirty water recovery tank (2)
3. Clean and rinse the recovery tank and the suction pipe (connecting pipe between the squeegee
and the tank).
4. Replace the cap on the drainage tube, and the cover on the dirty water recovery tank
ATTENTION: Before performing any type of maintenance, turn the main
switch to "OFF" and disconnect the battery connector of the machine (battery
version), disconnect the power cord from the mains socket (electric version).
ATTENTION: This operation must be carried out wearing gloves to protect
against contact with dangerous solutions.
27. CLEANING THE VACUUM MOTOR FILTER
1. Remove the cover from the dirty water recovery tank
2. Make sure the dirty water tank is empty; if necessary, empty it
3. Remove the suction filter protection (1) by rotating it clockwise
4. Remove the suction filter (2) from its seat
5. Use a jet of water to clean the walls and base of the filter
6. Reassemble all the elements
ATTENTION: These operations must be carried out using gloves to protect
against contact with dangerous solutions.
ATTENTION: Before performing any type of maintenance, turn the main switch
to "OFF" and disconnect the battery connector of the machine (battery version),
disconnect the power cord from the mains socket (electric version).
1
2
2
1