SYMBOLS USED ON THE MACHINE
LABELS USED ON THE MACHINE
SYMBOLS ON THE CONTROL DISPLAY
Symbol of maximum temperature for filling the solution tank:
Located on the front of the solution tank, to indicate the maximum temperature
of the water for filling the solution tank safely.
Filter body position symbol:
Located on the right-hand side of the machine to indicate the position of the
detergent solution filter.
Label for detergent solution tap control:
Located on the right-hand side of the machine, to identify the control knob of
the detergent solution tap.
Label indicating the need to read the Use and Maintenance Manual:
Attached to the machine in order to warn the operator to read the user and
maintenance manual (this document) before using the machine for the first time.
Battery recharge warning label:
Located inside the machine (above the electric system carter), to warn the
operator when it's necessary to recharge the batteries.
Daily care warning label:
Applied to the machine to remind the operator of the necessary procedures to
properly care for the machine itself.
Machine use warning label:
Located on the rear of the machine, to warn the operator which substances
cannot be removed with the machine.
Solution tank filter daily care warning label:
Applied to the machine to remind the operator to clean the solution tank after
each use.
Moving brush hazard label:
Used on the machine to warn the operator not to place his/her hands near the
moving brush.
Label warning about the risk of crushed hands:
Indicates danger to hands due to crushing between two surfaces.
Position symbol for the solution tank drainage cap:
Applied to the back of the machine to identify the solution tank drainage cap.
Position symbol for the recovery tank drainage tube:
Applied to the back of the machine to identify the recovery tank drainage tube.
Battery connection symbol:
Located on the front of the solution tank, to indicate how to connect the 12V
batteries in order to obtain a total voltage of 24V.
Main switch symbol:
Located near the control panel, to indicate the main key switch.
1. FFM symbol, if visible it shows that the “FIMAP FLEET MANAGEMENT” system is active.
2. FSS symbol, if visible it shows that the “FIMAP SOLUTION SAVER” system is active.
3. Hour meter.
4. Battery charge level percentage.
5. General alarm symbol.
6.
Solution tank float symbol. If visible, it shows that the recovery tank is empty and that to continue
you need to fill it.
7. Detergent solution level symbol.
8. Vacuum motor performance level symbol.
9. ECO-MODE “FIMAP ECO MODE” program button.
10. Drive Select selector.
11. Brush uncoupling button (single-brush version).
12. Menu screen activation button.
13. Text indicator.
14. Zone program selector button.
15. Brush head extra pressure level symbol.
16. Forward speed level symbol.
12
MANUAL
0000.00
100%
1
2
3
4
5
14
16
13
15
6
7
9
8
10
12
11
Summary of Contents for MAXIMA 2017 PLUS
