PERFORMANCE
1.
Carry out the operations for the preparation of the machine
2.
Sit on the driver’s seat
3.
Check that the parking brake is released (1)
4.
Connect the connector to the batteries (2)
5.
Turn the key of the general switch (3) clockwise of a quarter turn.
Immediately, the red signal lamps (4) on the instrument board begin to
blink and the batteries’ display (5) comes on. The blinking indicates that
the checking of the motors is taking place
6.
Press the suction motors switch (1)
7.
Press the switch of the cylindrical brush motor (2)
8.
Press the solenoid valve switch (3)
9.
Press the brushes motor switch (4)
10.
Place the switches (1 and 2) into their automatic positions
11.
Open the cock rotating the knob (3) counterclockwise. The signal lamp of
the water (4) comes on only during the moving period
12.
Collocate forward the drive selector (1)
13.
Select the speed movement rotating the knob (2)
47
