ADJUSTMENT
AND
INSPECTION
MAGNA 85 – 100 BS
Doc.
Issued 12/2006
Rev. 00
Pag.
15 di 18
Squeegee adjustment
1.
Loosen the block
wheels
.
2.
Lift the squeegee wheels from the floor.
3.
In this condition adjust the rubber squeegee inclination by
operating on the
knob
(loosen first the
lock nut
). The rubber
on the floor has to be bent uniformly along all the length of
the squeegee
4.
Screw down the wheels and lift the squeegee from the
ground: the inclination of the rubber should be about 45°
5.
Lock the
wheels.
45°
Check and adjustment of the brake
1.
To adjust the correct stroke of the brake pedal (two or three
releases for the parking condition) operate an adjustment on
the relative
forks
2.
Check the
oil level in the tank
. In case add oil D.O.T. 4 for
brake systems.
3.
Check if the right brake stops in the same way of the left one .
In case adjust again
the forks
.
Adjustment of the steering
1.
Adjust the right tension of the chain by acting upon the chain
tightening (
screw M8
)
