
17
PREPARATION OF MACHINE
80-90-110-100-120 B-D-Bifuel
2
80-90-110-100-120 B-D-Bifuel
1
80-90-110 B-D
3
5
3
5
4
6
100-120 B-D-Bifuel
ATTENTION:
during recharging, keep the seat lifted
and locked with the appropriate prop.
Make sure that the battery charger is suitable for the
batteries installed as regards their capacity as well as
their type (wet or gel batteries and similar).
Never recharge gel batteries with an unsuitable battery
charger. Follow the instructions given by the battery/
battery charger manufacturer with the utmost attention.
ATTENTION:
risk of gas exhalation and corrosive
liquids leaks.
ATTENTION:
danger of fire: Keep naked flames at a
safe distance.
ATTENTION:
to avoid permanent damage to the
batteries, it is essential to prevent them from running
down completely. When the run-down buzzer sounds,
all the machine functions must be deactivated apart
from the forward movement function (to reach the
recharge point).
ATTENTION:
any use of controls must carried out by
the operator seating at the driving seat.
4. SIDE BRUSH ADJUSTMENT
To assemble the brush:
1 Check the parking brake (1) is engaged.
2 Turn the wrench (2) clockwise the start-up the machine (see
chapter 8).
3 Check the battery charge is sufficient for carrying out the
work envisaged (B versions).
4 Close the hatch of the debris hopper:
80-90-110: pushing the lever (3) up
100-120: pushing the lever (4) back.
5 Raise the debris hopper until it reaches the required height:
80-90-110: pushing the lever (5) up
100-120: pushing the lever (6) back
6 Assemble the brush, blocking it with the bolt (7) supplied.
Lower the hopper by means of the hatch closing lever.