11
DAILY MAINTENANCE
PERFORM ALL MAINTENANCE OPERATIONS IN SEQUENCE
12.
DISASSEMBLING THE BRUSHES-PAD HOLDER
7.
Make sure the power supply cable is unplugged from the mains socket
8.
Check that the handlebars are in the rest position
9.
Tilt the machine until bringing the handlebars down to the ground, by putting a foot into the rear of
the base body
WARNING: This operation must be carried out using gloves to protect against
contact with dangerous solutions.
10.
Use the supplied handle to loosen the male center lock by turning it counter clockwise
11.
Remove the pad from the pad holder
12.
Screw the male center lock by turning it counter clockwise and lock it with the handle
