9
SPARE PARTS
(Refer to RD11-VAC-NPT-EXP drawing on previous page.)
MAINTENANCE
The Robo-Vac has been designed and continuously improved to provide many years of trouble-free service.
Most Robo-Vacs outlast the life of the compressor that it is serving.
Still, the Robo-Vac is a mechanical device and routine inspection and maintenance are important and
recommended
.
Weekly/Monthly
1. Use the test button to ensure the drain valve opens and closes.
2. Inspect interconnecting piping and tubing to ensure there are no leaks or damage.
Annually
1. Use the test button to ensure the drain valve opens and closes.
2. Inspect interconnecting piping and tubing to ensure there are no leaks or damage.
3. Replace Control Air Inlet Filter.
4. Check the four body bolts to ensure tight.
5. On the standard Robo-Vac with the translucent vessel, if the condensate level isn’t visible due to
vessel coated with contamination, it is recommended to remove the drain from service and follow the
simple disassembly instructions to permit the vessel to be thoroughly cleaned.
6. With the drain disassembled, exercise the float assembly to ensure it moves freely.
7. Again, with the drain disassembled, ensure the float is securely attached to the float bracket.
Item No.
Qty.
Part No.
Description
1
1
RDP-H2-KIT
Control Head Assembly
2
1
RDP-H1-KIT
Inlet Head Assembly
3
1
SSP-COCYL
Translucent Cylinder
4a
2
ED-G
Cylinder O-Rings
4b
2/2
RDP-VHG2, RDP-VHG3
Trigger Assembly O-Rings
4c
1
RDP-FILTER
Control Air Inlet Filter
5a,b
4/16
RDP-BOLT-KIT
Bolt/Nut Kit
6
1
RD11-FA1
Float and Trigger Block Assembly
7
1
RDP-VAC-FIT-KIT
Control Tubing Assembly
8
1
RDP-AC-KIT
Air Actuator Assembly
9
1
RDP-BV-KIT
Ball Valve Assembly
10
1
RDP-PV-KIT
Pinch Valve Assembly
