background image

 

 

24 

 

1 Goods manufactured by PAT : PAT warrants that the Goods manufactured by it will be free from 
defects in materials and workmanship for a period of 12 months from the date of 

AUTHENTICATION.

  Exceptions:  

Spare parts including replacement filters: 1 month from installation. 
Used and ex-demonstration equipment: 1 month from installation. 
In the case of any breach of warranty then PAT shall at its option remedy such defects or refund such 
sums as the Purchaser has paid to PAT in respect of such Goods. PAT shall be under no liability under the 
above warranties: 

1.1     arising from any drawing, design or specification supplied by the Purchaser; 
1.2     arising from improper installation, storage, use, modification or operation including but not 
limited to the use of consumable items not approved by PAT; 
2 Goods manufactured by third parties : PAT will use its best endeavours to obtain for the purchaser the 
benefit of any warranty provided by the original manufacturer of the Goods.  Repair or replacement, in 
whole or in part, of Goods which fail due to faulty manufacture is available from the original 
manufacturer under its warranty.  PAT must be consulted to approve the return of Goods for 

replacement or repair under the original manufacturer’s warranty.

   

3 All replacement items will be charged at the point of dispatch.  Provided the original items are 
received back at PAT within 28 days from the date upon which the Returns Authorisation Number is 
issued and PAT agree following testing / inspection that these are defective, a credit note will be 
issued.   
4 Services: PAT warrants that it will carry out the Services with reasonable care and skill. If PAT is shown 
to be in breach of this warranty in respect of particular Services it shall at its option and cost either re-
provide those Services or refund any sums already paid in respect of those Services. 
5 PAT does not exclude or limit its liability in negligence for death or personal injury, or for fraud or 
wilful default, or otherwise to the extent that any exclusion or limitation of its liability is void, prohibited 
or unenforceable by law. 
6 Subject to Clauses 6.1 - 6.5, all representations, warranties and conditions implied by trade custom, 
course of dealing, statute, common law or otherwise are excluded to the fullest extent permitted by 
law. 
7 Subject to Clause 6.5, in no circumstances shall PAT be liable to the Purchaser, in contract, at law or 
otherwise, for any incidental or consequential loss including, without limitation, any loss of profit, 
business, revenue, goodwill or anticipated savings or for any special, exemplary or consequential 
damages or other financial loss whatsoever arising out of or in connection with the Contract or the 
supply of the Goods or Services or their use or resale (if applicable) by the Purchaser. 
8 If notwithstanding the provisions of these Conditions PAT is found liable for any loss suffered by the 
Purchaser arising in any way out of or in connection with the Contract or the supply of any Goods or 
Services that liability shall in no event exceed the price paid for such Goods or Services. 
9 The parties hereby confirm that notwithstanding any other provision of the Contract or these 
Conditions, the Contract shall not and shall not purport to confer on any third party the right to enforce 
any term of the Contract.  
 

 

Summary of Contents for EXPAND 3

























Reviews: