12 |
P a g e
the back have of the cooler have tube plugs in them. These tube
sections must be
removed
before making all your connections. To
remove the tube sections see figure 7 “Disconnect”. The 1/4" plastic
tubing should be used for making the Feed Water and Drain
connections. If hard copper tubing is used for the Feed Water and
Drain connections the bulkhead fittings must be changed to a metal
fitting.
Figure 4.
Water Cooler Connections
Feed Water Connections
To connect the feed water, use the supplied self-piercing
saddle valve to connect to the cold water supply line under the sink.
