9
F Monitor 2 & 2+
Product Installation Manual
F-M ALL UNITS
All text, images and photographs Copyright Filtermist International 2019
8
!
!
!
GF*
!
!
!
!
F*
G*
!
!
!
GH*
F*
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
*
GU*
!
!
GG*
!
G*
G*
Attach motor clip to motor vane and clip tube 2 into position (tube should point
vertically upwards)
Connect tube 2 back to the f-monitor spigot 2, use hose “O” clip to retain (ensure the
clip does not crush the tube when securing.
IMPORTANT – When fitted with an Air Filter, ensure tubes are not
pinched or trapped as this will affect the function of the F-Monitor. (It may
be necessary to enlarge the seal cut-out)
Product Installation Manual
F-M ALL UNITS
!
!
*
*
*
*
*
*
*
15
0
All text, images and photographs Copyright Filtermist International 2019
9
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
GI*
For Filtermist units that are already in operation or without the pre-drilled hole in the exhaust
diaphragm the following instructions should be followed.
IMPORTANT – When fitting the F
Monitor
2
to units already installed it is
important that the unit is serviced and that the ducting and extraction point
are clean. This will ensure the monitor is recording the maximum airflow
after installation.
Failure to carry out this service may result in incorrect readings from the
monitor.
Remove components of the unit to gain access to the diaphragm
Drill a hole in position for the nozzle to be placed, and then follow connection
instructions as per image 10.
12
