Fillauer Aeris Performance 2, Product Manual, Page: 6 / 12

6
NOTICE: Attachment, alignment, and delivery of the foot must be
performed by or under the direct supervision of a qualified prosthetist.
Any adjustment or modifications should be done by the clinician and not
by the user .
NOTICE: If any serious incidents occur in relation to the usage of the
device, contact your Fillauer Representative and the appropriate authority
in your country .
Alignment (Specifications &
Preparations Before Use)
Proximal Attachment
Attachment of the foot may be achieved via the proximal pyramid to any ISO 10328
compliant, Fillauer or equal, standard adult pyramid receiver. Torque all set screws
to the setting specified by the manufacturer of the pyramid receiver. For Fillauer
components, this is 15 N·m. Proper thread locker must be used for final delivery per
the component manufacturer’s specifications.
5°
Figure 2
Static and Bench Alignment
Standard bench alignment techniques may be used for the Aeris Performance 2 foot
(Figure 2). Before aligning, the initial heel height should be established. The Aeris
Performance 2 is designed for a ⅜ inch or 1 cm heel height. The initial heel height can
be established with a simple spacer under the heel. The top of the pyramid should be
parallel with the work surface before proceeding with alignment. A backward leaning
pylon indicates that the heel height is too low and will make late-stance rollover
difficult.