Installation and Operation Manual
FSM-IP NVR
6
P/N 06-521 (Rev. 3)
Revision Date: June, 2019
4.0 Getting Started
This section will guide you through unpacking, installation and configuration of the FSM‐IP NVR. Then it will
explain how to establish the connection to the Fike Video Analytics IP cameras and the video management
software workstation.
The following equipment is necessary to set up the system
1.
FSM‐IP NVR
2.
One or more Fike Video Analytics IP camera
3.
Dedicated monitoring workstation
4.
Network infrastructure equipment
At this point we assume that the Fike Video Analytics IP cameras are installed in place and connected to an
Ethernet network. We also assume that the Fike Video Analytics IP camera static IP addresses are set up
without conflict
1
. For proper camera configuration refer to the Fike Video Analytics IP Camera Operations
Manual.
4.1 Connecting the Server
FSM‐IP is equipped with two CAT‐5 NIC ports [Figure 2] just for purpose of separating the IP camera network
(usually an isolated subnet) from the user interface network (usually the end users corporate network)
[Figure 1].
Figure 2: Network Interface Card CAT5 connectors on the back plane of the server
1
Address assignment may be managed by network administrator
NIC B
NIC A
