2
FIK-RA2000 Product Installation Instructions —
P/N LS10261-001FK-E:A 03/03/2021
2 Mounting
2.1 Flush Mounting
To flush mount the FIK-RA2000, refer to the following steps.
1.
The backbox measures 9-1/4” W x 8-3/8” H. The backbox can be mounted prior to the complete installation of the FIK-RA2000 using
any of the mounting holes shown in Figure 2.
Figure 2 Backbox Mounting Holes
2.
Remove the knockout holes to use to pull through the wires, as needed. See Figure 3 for the backbox knockout locations.
Figure 3 Backbox Knockout Locations
3.
Wire the annunciator board to the main control panel. See Figure 7.
4.
Use the supplied screws to attach the annunciator/door assembly to backbox as shown in Figure 4.
Figure 4 Attaching the Door Assembly to the Backbox
mounting holes
mounting holes
wire knockouts
wire knockouts
wire knockouts
