Fike EP0856828 User Manual Download Page 21 | Manualshive

Page: 21 / 32

background image

TWINFLEX

®

pro Control Panel User Guide

21

The Test buzzer function toggles on and off to ensure correct buzzer
operation. The test light will illuminate while this action is taken.

The Test keyboard function enables the user to select each button to ensure
the correct function is shown on the screen. Press the

ESC

key

TWICE

to exit

the menu.

The Silent Test function allows the selection of one or more detection-zones
to  operate  in  a  ‘silent  one-man  walk  test  mode’.  On  triggering  a  device  the
device  LED  operates  and  the  event  is  recorded  into  the  event  log  as  a  test
activation,  but  the  sounder  does  not  sound  and  the  control  panel  does  not
show  an  alarm.  After  approximately  5  seconds  the  system  will  reset  the
device,  and  another  may  be  tested.  The  control  panel  event  log  will  indicate
that  a  test  mode  has  been  selected.  This  operation  will  also  enable  the  test
LED.

N.B. To put ALL zones into test, enter 00 for the zone number.

The Local Audible Test function allows the selection of one or more detection-
zones  to  operate  in  a  ‘one-man  walk  test  mode  with  local  sound’.  On
triggering  a  device  the  device  LED  operates,  the  sounder  within  that  device
operates and the event is recorded into the event log as a test activation, but
the control panel does not show an alarm. After approximately 5 seconds the
system  will  reset  the  device,  and  another  may  be  tested.  The  control  panel
event log will indicate that a test mode has been selected.

N.B. To put ALL zones into test enter 00 for the zone number.

2. Test Modes

1. Test Cntrls & Disp

3. Test Buzzer

2. Test Modes

1. Test Cntrls & Disp

4. Test Keyboard

2. Test Modes

2. Test Zone

1. Silent Test

2. Test Modes

2. Test Zone

2. Audible Test

01/09/09 22:26 SUPR
BUZZER TESTING..
BUZZER ON
Press Enter Key

01/09/09 22:26 SUPR
KEYBOARD TESTING..
ENTER key PRESSED.
Press Enter Key

01/09/09 22:26 SUPR
SILENT TEST (ZONES).
ENTER ZONE:00
Press Enter Key

01/09/09 22:26 SUPR
TEST ZONE 01
1.START 2.END
Press <> OR Esc Key

01/09/09 22:26 SUPR
AUDIBLE TEST (ZONES)
ENTER ZONE:00
Press Enter Key

01/09/09 22:26 SUPR
TEST ALL ZONES
1.START 2.END
Press <> OR Esc Key

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

«
...
19
20
21
22
23
...
»

Summary of Contents for EP0856828

































Reviews:

No comments

Related manuals for EP0856828

Brand: Hamworthy Pages: 10

Brand: Zolix Instruments Pages: 22

Brand: Garmin Pages: 12

Brand: KAR-TECH Pages: 28

Brand: 2iB Pages: 5

Go!Control Panel

Brand: 2gig Technologies Pages: 78

BT300 BurnerTronic

Brand: Lamtec Pages: 48

Brand: Vaillant Pages: 27

Brand: Vaillant Pages: 36

Brand: Vaillant Pages: 28

Brand: Vaillant Pages: 92

Brand: Vega Pages: 20

Brand: Watts Pages: 4

Brand: WaterCop Pages: 4

Brand: Parker Pages: 4

Brand: M-system Pages: 7

Brand: Dickey-John Pages: 109

by-me Eikon 20526

Brand: Vimar Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands