TWINFLEX
®
pro Control Panel User Guide
16
Advanced Operation
Access Level 1 (Normal):
Controls Enabled LED off
At Access Level 1 (Normal), the main
Fire Alarm Controls
are disabled and the following
System Controls
will only be accessible if a fire, fault or disablement is active on the panel:
These are described below. Note that actual display indications may differ from those shown in the grey boxes
below, depending on actual set up.
The Active Log will display any current fires. These are displayed in
text format and may be scrolled through by pressing the
UP
and
DOWN
keys. Press the
ESC
key to exit the menu.
.
The Active Log will display any current faults. These are displayed in
text format and may be scrolled through by pressing the
UP
and
DOWN
keys. Press the
ESC
key to exit the menu.
The Active Log will display any current disables. These are displayed
in text format and may be scrolled through by pressing the
UP
and
DOWN
keys. Press the
ESC
key to exit the menu.
.
NORMAL
1. View Events
1. Current Fires
2. Current Faults
3. Current Disables
1. View Events
1. Current Fires
1. View Events
2. Current Faults
1. View Events
3. Current Disables
FIRE 001 OF 001
Z01: ZONE 01
Press <> OR Esc Key
FAULT 001 OF 001
Z00: NA
Batt
–
Low Vtg
Press <> OR Esc Key
01/09/09 22:26 NORM
01.REMOTE FIRE
Press <> OR Esc Key
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
