background image

1

General Notes

•   

The Q8 Junior has been designed for professional studio and location applications and may only 
be operated by qualified persons.

•   

Please read the following operating instructions very carefully before using this fixture.

•   

For your own safety, please follow all safety instructions and warnings.

•   

Keep these operating instructions for future reference.

•   

For further information, contact Fiilex ([email protected]) or your retailer.

Basic Operation

 

(refer to Parts Diagram on following page)

•   Turning On

Insert the powerCON cable into the Power Input Port (19) and rotate clockwise to lock it in place. 
Plug the light into an appropriate outlet. The On/Off Button (20) will turn red to indicate standby 
mode. Press the On/Off Button (20) to turn on the light. The button will turn green to indicate that 
the light is on.

•   Mounting

The Q8 Junior has a combo stand adapter mount that can mount to junior pin receivers or baby 
pins. The fixture can be secured to a stand by tightening the Stand Mount Knob (8).

•   Positioning

To adjust the Q8 Junior, grasp the Handles (11) then loosen the Tilt Lock Lever (10). Adjust the 
angle to the desired position the tighten the Tilt Lock Lever (10) to secure.

•   Adjusting Beam Angle

Adjust the beam angle by turning the Focusing Knob (6). The Water-Resistant Bellows (2) will 
extend, pushing out the Fresnel Lens (5) and focusing the light beam.

•   DMX Interface

The Q8 Junior is equipped with two DMX interfaces. RJ45 (17) or XLR Ports (16 & 21) are used to 
send the DMX signal to the lamp head. Both interfaces include in/out ports for the purpose of 
daisy-chaining the DMX line through to the next lamp head. 

•   USB Interface

The Q8 Junior is equipped with a Mini USB port for updating the Q8 Junior’s firmware. Please 
register your product at www.fiilex.com to be informed when firmware updates are available. 

Mode

Standby

Red

Manual controls enabled but no light output

Manual controls enabled and there is light output

Green

Output

Active DMX signal detected. Manual Controls disabled

Orange

DMX

Description

On/Off 

Button Color

Reviews: