SMART SMOKE DETECTOR
USER MANUAL
6
5.1.2 CONNECTING A SMOKE DETECTOR TO YOUR FIFTHPLAY CUBE
C
IMPORTANT: Ensure that the smoke detector is in the immediate vicinity (0.5 to 1 meter) of the gateway.
You can connect your smoke detector to your fifthplay cube in the following 2 ways:
Via the APP:
1.
Open the fifthplay Home app and log in.
2.
At the top left of the app, click on and select '
CONFIGURATION
'.
3.
Go to '
DEVICES
'.
4.
At the top right, click on
+
.
5.
Select '
SENSOR
' as the type of device.
6.
Select '
SMOKE DETECTOR
'.
7.
Wait until the gateway is in connection mode (Once the connection mode has been established, you will
see a notification on your screen). If this is not the case, click on '
CANCEL
' and '
TRY AGAIN
'.
Please note: If no
devices to be added are found, the connection mode will automatically be terminated after 2 minutes.
8.
Press 3x briefly (less than 1 second) on the program switch of the sensor (C) to set up the connection with the
gateway. Once the connection has been established, you will see a confirmation message on your screen.
Please note: If no device is found within 30 seconds, press the programming button (A) again.
9.
Once the smoke detector has been added, you will see a notification on your screen.
10.
If desired, change the name of the smoke detector.
Via the WEBSITE:
1.
Go to home.fifthplay.com and log in.
2.
Go to '
CONFIGURATION
'.
3.
Go to '
DEVICES
'.
4.
Click on '
ADD A DEVICE
'.
5.
Click on '
ADD A SENSOR
'.
6.
Select '
SMOKE DETECTOR
' and click on '
NEXT
'.
7.
Wait until the gateway is in connection mode (Once the connection mode has been established, you will
see a notification on your screen). If this is not the case, click on '
CANCEL
' and '
TRY AGAIN
'.
Please note: If no
devices to be added are found, the connection mode will automatically be terminated after 2 minutes.
8.
Press 3x briefly (less than 1 second) on the program switch of the sensor (C) to set up the connection with the
gateway. Once the connection has been established, you will see a confirmation message on your screen.
Please note: If no device is found within 30 seconds, press the programming button (A) again.
9.
Once the smoke detector has been added, you will see a notification on your screen.
10.
If desired, change the name of the smoke detector.
