People Counter RAZL-2CO (Translation)
3 Commissioning single pillar (standalone)
After plugging the connection cable into a 230 V earthed socket, the traffic light is illuminated
blue
during the starting
process ca. 1 minute.
As soon as the traffic light colour changes, the sensor pillar provides a WLAN for mobile
devices with a web browser such as a smartphone, tablet or notebook for configuration.
3.1 WLAN connection / single pillar (standalone)
Step 1:
Select "
WLAN
" in the
Settings menu
of the mobile device. After a short time, all available WLAN connections are displayed.
Step 2:
Select WLAN with the name "
RAZL-
serial number of the sensor pillar
" (the serial number is located on the nameplate of the sensor
pillar)
Step 3:
Enter preset WLAN password "
fiessler#razl
".
Step 4:
A message may appear on the mobile device that an Internet connection is no longer possible.
It must be selected that the WLAN connection is retained.
If the mobile device is connected to this WLAN, an Internet connection with the mobile device is no longer possible until the connection to this
WLAN is terminated.
3.2 Set the operating mode of the pillar (Standalone)
Step 1:
Start setup wizard
Open the Internet browser of the mobile device
Enter "
http://razl.lan
" or "
http://10.1.10.1
" in the address bar and confirm
The setup wizard is started
Select language
Step 2:
Define pillar as single pillar
Select operating mode "
Standalone / Independent RAZL-WLAN Hotspot
"
Step 3:
Assign a new WLAN pass-
word
Change WLAN password and apply settings
After the settings have been accepted, the pillar is restarted
3.3 Configuration
Step 1:
Wait until the traffic light colour changes from blue to another colour.
Step 2:
In the mobile device, select
WLAN
with the name "
RAZL-
serial number of sensor pillar
" and enter a
new
WLAN password
Reload the page "
http://razl.lan
" or "
http://10.1.10.1
" in the browser address bar
Step 6:
Lock symbol (top right)
Step 7:
In the menu
Select
device overview
Select
setting wheel
Start device configuration
"
Installation of the counting light barrier...
" and "
Type of use
" must be set. Incoming and outgoing persons can only be detec-
ted correctly if the setting corresponds to the actual installation location of the pillars and their use as an entrance and/or exit.
-24-
Fiessler Elektronik GmbH & Co. KG
Phone: +49 (0)711 - 91 96 97 - 0
Internet: http://fiessler.de
Buchenteich 14, D-73773 Aichwald
Fax: +49 (0) 711 - 91 96 97 - 50
E-Mail: [email protected]
