People Counter RAZL-2CO (Translation)
6.1 Adjustment mode / Alignment of the pillars
The supplied cover template should be located on the reflector pillar. The red lines symbolise the 2 light beams of the counting light barrier.
Incorrect
Incorrect
Incorrect
Traffic light flashes
white
Traffic light flashes
yellow
Traffic light flashes
red
Pillars are slightly twisted to each other
Sensor pillar must be turned slightly anti-
clockwise until the traffic light flashes
green
Pillars are slightly twisted to each other
Turn the sensor pillar slightly clockwise until the
traffic light flashes
green
Pillars are significantly twisted to each other or
one pillar is completely covered
The pillars must be aligned in a parallel plane.
Correct
Incorrect
Incorrect
traffic light flashes
green
traffic light flashes
green
traffic light flashes
green
Pillars are aligned in a plane parallel alignment
The alignment must still be checked
(see following section
Adjustment mode / Check alignment
).
Sensor pillar offset to the left
The pillars must be aligned in one line.
Sensor pillar offset to the right
The pillars must be aligned in one line.
-30-
Fiessler Elektronik GmbH & Co. KG
Phone: +49 (0)711 - 91 96 97 - 0
Internet: http://fiessler.de
Buchenteich 14, D-73773 Aichwald
Fax: +49 (0) 711 - 91 96 97 - 50
E-Mail: [email protected]
