4.3 Installation of transmitter and receiver
When installing the transmitter and receiver, it must be ensured that connectors of both devices are located on the same side.
The receiver and transmitter must be installed with parallel faces.
Attachment and adjustment
The supplied fastening brackets serve the attachment and adjustment of the light
barrier. Together with the shifting tenon blocks, the latches enable a universal
attachment.
The swivel the longitudinal axis, turn the respective adjusting screw on one of the
fastening brackets whilst both screws on the other fastening bracket are loose. To swivel
the lateral axis, turn both screws of a fastening bracket at the same time whilst both
screws on the other fastening bracket are loose.
Rubber-metal connection
In the event of intense vibrations, please use rubber-metal connections which can be obtained as optional accessories.
Wall mounting example
FIESSLER
E L E K T R O N I K
djusting screws with counter nuts for swivelling along longitudinal and lateral axes.
Further adjustment information is provided in Section 6, "Commissioning".
Bore dia.: 7 mm for attachment of
light barrier
4 Installation
- Installation of transmitter and receiver
M6 x 15 DIN 912
50 x20 x 2
A
A
A
A
A
A
A
A
40 X 90 x 6
40 X 90 x 6
50 x20 x 2
M8 DIN 912
M8 DIN 127
M6 DIN 934
M6 DIN 127
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Longitudinal
axis
Lateral axis
Fig. 14/1 Installation with parallel faces
Fig. 14/2 Swivelling along longitudinal and
lateral axis
Depends on run-
on time of machine
Machine
Important:
In order to ensure error-free operation, both the light transmitter and light receiver
must attached to stable, distortion-free and face-parallel constructions. Install the
fastening brackets so that the adjusting screws remain easily accessible.
Make sure that the shape is not distorted. Otherwise a perfect visual adjustment will
not be possible. Adjust one fastening bracket whilst the adjusting screws on the other
fastening bracket are loose.
BA - ULVT
14
