Fiery Fiery EX2101, Installation Manual

Page: 20 / 108

1
1-6 Installing User Software on a Windows Computer
5. Enter the Fiery EX2101 IP address or DNS name.
6. If you want your printer driver to display the current settings when opened, select
Update Fiery Driver When Opened.
7. Click Update, and then click OK.
Completing the Windows 98/Me printer connection
To print from Windows 98/Me, you must:
• Set up network servers, if any.
• Set up the Fiery EX2101 to accept print jobs from your computer.
• Configure a port on each Windows 98/Me computer for the network type.
Completing the Windows 98/Me IPX/SPX or IPX (Novell) connection
If you are printing through a Novell server, the Novell network and file server should
be set up before you begin. The file server should be configured with a print server and
print connection for the Fiery EX2101. For details, see your NetWare documentation
and the
Configuration Guide .
To print from Windows 98/Me computers over IPX (Novell), you must first set up
IPX/SPX protocols, and then configure the Fiery EX2101 by choosing the IPX frame
type and entering the settings for the port you use.
To do this See
Configure the IPX (Novell) connection “Completing the Windows 98/Me IPX/SPX or
IPX (Novell) connection”
on page 1-6
Setting up the Windows (SMB) printing “Setting up SMB printing with
Windows 98/Me”
on page 1-9
Setting up IPP printing “Setting up IPP printing with
Windows 98/Me”
on page 1-11