1
1-9
Setting up PostScript or PCL printing with Windows 98/Me
4.
In the Add Port dialog box, specify the network path, or click Browse for a display of
your network environment.
5.
If you are using a NetWare file server, double-click the icon for the NetWare file server
to use for printing to the Fiery EX2101.
6.
Click the printer icon for the NetWare print queue you want to use and click OK.
7.
In the Add Port dialog box, verify that the network path is updated and click OK.
Your print jobs are transmitted to the specified print queue on the Novell file server.
The Fiery EX2101 polls the file server, and if jobs are present, they are transmitted to
the Fiery EX2101.
8.
To confirm the connection, click the General tab, click Apply, and then click Print
Test Page.
After the Test Page prints successfully, you are ready to print from the computer.
Setting up SMB printing with Windows 98/Me
SMB printing (also known as Windows or WINS printing) allows you to install the
PostScript or PCL printer driver and printer description files on your computer from
the Fiery EX2101 using Point and Print, and print to a particular connection (Hold,
Print, or Direct). To set up SMB printing, you must have the TCP/IP protocol and
Client for Microsoft Networks installed.
Each connection (Hold, Print, or Direct) requires a new printer driver and printer
description file. For each connection, repeat the procedure
on page 1-10. If you install more than one printer, give each a
descriptive name during printer driver installation, such as
Aero-Print
or
Aero-Hold
, so
you can easily identify printers.
B
EFORE
YOU
BEGIN
•
Configure the Fiery EX2101 for SMB printing in Run Setup> Network Setup > Service
Setup > Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map,
and on the Configuration page.
