manualshive.com logo in svg

FieldServer Profibus DP FS-8700-20, Driver Manual

Share
Download
FieldServer Profibus DP FS-8700-20 Driver Manual Download Page 11

FS-8700-20 Profibus DP Driver Manual 

 

 

 

 

 

Page 11 of 22 

 

FieldServer Technologies

 1991 Tarob Court Milpitas, California 95035 USA  

Web

:www.fieldServer.com 

Tel

: (408) 262-2299   

Fax

: (408) 262-9042   

Toll_Free

: 888-509-1970   

email

: [email protected] 

4) Set the Baud Rate to a value supported by the Slaves and your cabling media. Choose a 
highest Station on the network if you wish to enhance performance, which will prevent the 
Master from scanning non-existant Stations. Click OK to complete the network configuration. 
 

 

 
5) Drag your Slave devices onto the right window pane and configure them as per 
manufacturer’s instructions. Choose a unique Station ID for each Slave. 
 
There has to be Node descriptor with matching Node ID to Station ID for each Slave setup 
in the FieldServer’s config.csv file. 
 

Important Note: 

All Profibus Masters check for a match in the connection size in bytes to Slaves before 
allowing a connection. Make sure you add the appropriate Modules for Input/Output Data to 
create a connection size that matches the connection size setup in the Slave device; 
otherwise the Master will not connect to the Slave. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Profibus DP FS-8700-20























Reviews:

No comments

Brands by name

Popular brands

Load more brands