manualshive.com logo in svg

FieldServer FS-8700-66, Manual

Share
Download
FieldServer FS-8700-66 Manual Download Page 24

Page 24 of 29FS-8700-66_GE-SNP Manual 

 

 

 

 

Page 24 of 29 

 

FieldServer Technologies

 1991 Tarob Court Milpitas, California 95035 USA  

Web

:www.fieldServer.com 

Tel

: (408) 262-2299   

Fax

: (408) 262-2296   

Toll_Free

: 888-509-1970   

email

: [email protected] 

No Message 

Description 

38 GE_STAT_DRV_ACT_NO_DATA_R         

Corresponds  to  slave  driver  actions  in 
responding  to  a  poll.          There  is  no  data 
available. 

39 GE_STAT_DRV_ACT_NO_NODE_R         

Corresponds  to  slave  driver  actions  in 
responding  to  a  poll.          This  should  never 
happen  as  a  connection  would  have  been 
refused. 

40 GE_STAT_DRV_ACT_NAK_R             

The  slave  cannot respond  to  a  poll for  one 
of the reasons above. 

41 GE_STAT_DRV_ACT_NORMAL_R          

The  Server  has  responded  to  a  poll 
normally 

42 GE_STAT_CD_UPD_CHECK              

A  message  is  invalid  because  the 
checksum failed. 

43 GE_STAT_CD_UPD_FUNCTION           

A message is invalid because the message 
type is not known. 

44 GE_STAT_CD_UPD_NO_START           

A message is invalid because it begins with 
the wrong codes. 

45 GE_STAT_CD_UPD_PROTO              

A  message  is  invalid  because  it  is 
unexpected  in  its  current  context  or  some 
other reason. 

46 GE_STAT_CLIENT_SENDS_FRAG         

Counts  the  number  of  read/write  message 
fragments sent by the Client. 

47 GE_STAT_CD_UPD_IC_TIMEOUT         

Counts  the  number  of  times  that  an  IC 
timeout error occurred at the DLL layer 

48 GE_STAT_CD_UPD_MSG_IGNORED        

Counts  the  number  of  times  a  message 
was  ignored.  A  message  will  be  printed  to 
the error log with the reason. 

49 GE_STAT_CD_UPD_NAK                

Counts  the  number  of  times  that  the  slave 
received a short nak from the Client 

50 GE_STAT_CD_UPD_STREAMING          

Counts the number of times the DLL layer's 
buffer  was  too  full  to  process  additional 
incoming data. 

 

Summary of Contents for FS-8700-66






























Reviews:

No comments

Brands by name

Popular brands

Load more brands