background image

Check for parts online at 

www.getfieldsedge.com

 or call 800-345-6007 M-F 8-5

23

Operator's Manual

String Mower M200

PRODUCT WARRANTY: 5-YEAR LIMITED WARRANTY – 10/01/2014

Ardisam, Inc. (Ardisam), a manufacturing company, warrants this product to be free from defects in the material or workmanship 

for a period of five years from the date of purchase. If there is insufficient evidence of the purchase date, the effective date of 

this warranty will begin on the string mower’s date of manufacture. During the five-year warranty of this product, Ardisam will 

furnish, at their discretion, parts and labor to correct any defect caused by faulty material or workmanship. In no event shall 

recovery of any kind be greater than the amount of the purchase price of the product sold. Ardisam reserves the right to inspect 

any incoming units returned under warranty to determine if the warranty applies before performing any warranty related work 

(including parts and components). Any unit used in a commercial application, or producing income is covered for a period of 

90 days after purchase. This warranty applies to the original owner with a proof of purchase and is not transferable. For the 

warranty to be valid, the product must be registered online, or the warranty card must be filled out and received by Ardisam, 

within 30 days of purchase. This warranty excludes parts due to normal wear, wear items such as belts, bearings, cables, wheels, 

tires, trimmer line, debris shield, line cutter, routine maintenance items such as filter elements, o-rings, seals, lubricants, and 

tune-ups, accessory parts such as nylon parts bag and height adjustment heads. Negligent use such as running dry (without 

oil), or below minimum oil levels, using the string mower for a purpose other than for which it was designed and manufactured, 

using the string mower in violation of local codes, ordinances and good trade practices voids this warranty. *These warranties 

apply only to products which have not been subjected to negligent use, abuse, misuse, overload, improper installation, 

alteration, accident, acts of God (or other events beyond Ardisam’s control), vandalism, unauthorized parts, failure to use proper 

fuel and oil, or if repairs have been performed at a non-authorized service facility. These warranties shall not cover damage 

from normal wear and tear, normal maintenance parts and services, lightning; nor improper installation, operation, storage, or 

maintenance; nor operating the equipment above recommended maximums as stated in this manual and the accompanying 

engine manual. These warranties supersede all other warranties either expressed or implied and all other obligations or 

liabilities on the part of Ardisam. Ardisam, does not assume, and does not authorize any other person to assume for Ardisam, 

any liability in connection with the sale of Ardisam products. To be at “No Charge,” warranty work must be sent directly to and 

performed by Ardisam or an Ardisam Authorized Warranty Service Facility. To obtain warranty service and/or replacement 

instructions, contact the Ardisam Customer Service Department at 800-345-6007. If you choose to ship your product to Ardisam 

for warranty repair, you must first have prior approval from Ardisam by calling the Ardisam Customer Service Department for a 

return material authorization number (RMA#). Under these circumstances, all items must be shipped prepaid. Ardisam will at no 

charge, repair or replace, at the discretion of Ardisam, any defective part which falls under the conditions stated above. Ardisam 

retains the right to change models, specifications and price without notice. Ardisam shall not be obligated to ship any repair or 

replacement product to any location outside of the United States of America or Canada. Some states and countries do not allow 

the limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, 

so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights 

which vary from state to state and country to country.

SEE ENGINE MANUAL FOR ENGINE WARRANTY

      

WARRANTY TERMS AND CONDITIONS

P/N: 21479

REV1: 111914

© 2014 Ardisam, Inc.

All Rights Reserved. 

Fields Edge™, Division of Ardisam, Inc.

1160 8th Avenue; P.O. Box 666

Cumberland, Wisconsin 54829

800-345-6007 • Fax (715) 822-4180

E-mail: [email protected]

Summary of Contents for M200

























Reviews: