manualshive.com logo in svg

Fields at Work ExpoM-ELF, User Manual

Share
Download
Fields at Work ExpoM-ELF User Manual Download Page 13

Fields at Work GmbH, Sonneggstrasse 60, 8006 Zürich, Schweiz

 

2017 Fields at Work GmbH, Zurich  

ExpoM - ELF manual rev. 1.1

  

Page 13/19 

i 

The 

Data Logger

 options allow to choose which of the bands shall be measured during automatic 

data  logging.  The  selected  bands  are  all  measured  one  after  another  within  the  selected 
measurement  interval.  Please  note  that  the  minimum  recommended  measurement  interval  is 
higher when more than one band is selected (see 6.6). 

 

Figure 5: Device settings window 

When new measurement settings are saved to the device, the connected ExpoM - ELF device must 
be switched off and on again for the changes to take effect. 

 

Important Notice:

 The accuracy and reliability of the GPS localization depends on the environmental 

conditions. Inside buildings and homes GPS localization may not be possible. After switching on the 
device, the GPS receiver may take several minutes to search for satellites. No position data will be 
logged during this time. The first few GPS measurements can have reduced position accuracy. 

5.6.1

 

Firmware Update 

The firmware of ExpoM - ELF can be updated to improve its functionality and features. Firmware 
updates are published on our homepage and can be loaded to the device by the user. 

When a device is connected, the firmware updater can be started by clicking on the corresponding 
button on the bottom right of the device settings window. The update dialog will appear (Figure 6). 

Before applying the update, the connected ExpoM - ELF device must be put into update mode. This 
is achieved with following steps: Switch off the  ExpoM - ELF device and switch it on again while 
pressing the marker button. The multi-color LED will flash slowly with a bright color. The firmware 
update process consists of two steps. First, a valid update file must be selected. After that, the file 
can be transferred to the device. This step takes a few seconds to complete. When the update is 
successfully terminated, the ExpoM - ELF device must be restarted using the ON/OFF switch. The 
updated firmware is now active. 

Summary of Contents for ExpoM-ELF




















Reviews:

No comments

Brands by name

Popular brands

Load more brands