Fieldpiece CAT45 Operator'S Manual Download Page 17

33

32

Limited Warranty

This device is warranted against defects in 

material or workmanship for one year from date 

of purchase from an authorized Fieldpiece dealer  

The O2 and CO sensors are warranted against 

defects in material or workmanship for four 

years from date of purchase from an authorized 

Fieldpiece dealer  

Fieldpiece will replace or repair the defective 

unit, at its option, subject to verification of the 

defect 

This warranty does not apply to defects 

resulting from abuse, neglect, accident, 

unauthorized repair, alteration, or unreasonable 

use of the analyzer 

Any implied warranties arising from the sale of 

a Fieldpiece product, including but not limited to 

implied warranties of merchantability and fitness 

for a particular purpose, are limited to the above  

Fieldpiece shall not be liable for loss of use of the 

analyzer or other incidental or consequential 

damages, expenses, or economic loss, or for any 

claim of such damage, expenses, or economic 

loss  

State laws vary  The above limitations or 

exclusions may not apply to you 

Obtaining Service

Visit 

www.fieldpiece.com/rma

 for the latest 

information on how to obtain service  

Warranty for products purchased outside of the 

U S  should be handled through local distributors  

Visit our website to find your local distributor 

Summary of Contents for CAT45




















Reviews: