Operating instructions:
Operating instructions:
Operating instructions:
Operating instructions:
Operating instructions:
1. Connect the ACH Clamp Head
to digital multimeter V-W and
COM terminals. (Polarity is
not important.)
2. Set the multimeter to mVAC
range.
3. Snap the jaws of the current
converter around one of the
current-carrying conductors.
Make sure the jaws are tightly
clamped.
4. Directly read the current value
(in amperes) indicated on the
display (multiply by 1000 if
using the 2V range).
5. If meter dispalays overload,
change range to next highest
(2000mVAC or 2VAC. For
2VAC range, multiply reading
by 1000.)
