Fieldmann FZS 2505 E, Manual

Page: 10 / 96

EN 10
FZS 2505 E
Winding string trimmer line on to the trimmer head
1. Push in the retaining latches on the side of the
head and take off the cover (see Fig. 7, points
A&B)
2. Take the spool out of the string trimmer head.
Prepare about 2 m of string trimmer line with
a diameter of 1.4 mm.
3. Bend the string trimmer line in the middle and
secure the bend in the groove (see Fig. 7,
point C)
4. Wind both ends in parallel on to the spool in
a clockwise direction. Secure the ends of the
wound on string trimmer line into the prepared
holes (see Fig. 7, point D)
5. Return the spool back into the string trimmer
head and secure in place with the cover
(see Fig. 7, points E&F)
WARNING
Use only good quality nylon string trimmer line with
a diameter of 1.4 mm. Never use wire or wire-
reinforced string trimmer line instead of the nylon
string trimmer line. Only use the original string
trimmer head.
B
C
D
E F
A
Fig. 7
Assembly