Fieldmann FZR 1050 E, Instructions For Use Manual

Page: 10 / 76

EN 10
FZR 1050 E
Assembly
5. ASSEMBLY
For the purpose of transportation, the lawnmower is supplied disassembled. Before use, it must be assembled
according to the following steps:
5.1 INSTALLING THE HANDLE
Connect the bottom part of the handle to the lawnmower chassis (Fig. 2.1)
Place the cable lock on the right side of the centre handle (Figure 2.2)
Attach the upper part to the centre with the thumbscrews. Then attach the two parts to the lower handle
(Fig. 2.3)
Note
: the handle can be folded for storage purposes.
5.2 INSTALLING THE BASKET AND ITS USE
Connect the two parts of the metal frame A and B (Fig. 2.4)
Thread the fabric onto the basket frame and attach the ends to the frame (Fig. 2.5)
Connect the basket to the mower (Fig. 2.6)
Fig. 2.1
Fig. 2.2
Fig. 2.4
Fig. 2.5
Fig. 2.6
Fig. 2.3