EN
12
FZN 4000 A
Putting into operation
|
Replacing the blades
6. PUTTING INTO OPERATION
IMPORTANT
: This is a power tool that is very easy and comfortable to use. Please pay special attention to
the position of the blades during work with this tool so that you avoid injury.
Using the tool (Fig 3)
ATTENTION!
Never remove or interfere with the
function of the starting mechanism.
The start safety lock prevents your tool from being
started accidentally.
Starting the shears
1. Press the trigger safety lock (Fig 3, point 1)
and then press the start/stop trigger (Fig 3, point
2).
2. Release the trigger safety lock (Fig 3, point 1).
Turning off the shears
Release the start/stop trigger (Fig. 3, point 2).
Fig. 3
7. REPLACING THE BLADES
ATTENTION!
Sharp blades may cause injuries, replace only when wearing
gloves.
ATTENTION!
When replacing the blades, never press the trigger safety lock.
1. With your thumb push on the blade cover safety lock (Fig 4, point 1)
2. Pulling in the direction of the arrow (Fig. 4, point 2), unlock the blade cover.
3. Moving upwards, remove the blade cover (Fig 4, point 3) (Fig 5)
4. Remove the blade (Fig. 6)
5. Put on the replacement blade and secure the blade cover (Fig. 7)
Fig. 4
Fig. 5
