Fieldmann FZN 1001-A, Manual

Page: 15 / 108

15
CORDLESS HEDGE TRIMMER USER‘S MANUAL
EN Safety instructions
Service
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
Additional safety instructions for hedge trimmers
Wear safety goggles when operating this tool.
Wear gloves when operating this tool.
Do not expose the tool to rain or high humidity.
WARNING!
This tool can cause serious injuries. Read instructions carefully for the correct
handling, preparation, maintenance, starting and stopping of the tool. Be familiar with all
controls and proper use of the tool;
Only use the tool in daylight or good artificial light.
Never allow children to operate the tool;
Avoid operating while people, especially children are nearby;
Beware of overhead power lines;
Dress properly! Do not wear loose clothing or jewellery which can be caught in moving parts.
Use of sturdy gloves, non-skid footwear, and safety glasses is recommended;
If the tool stalls, immediately switch it off. Remove the battery before attempting to remove
any obstructions
Remove the battery before checking, maintenance or working on the tool;
While operating the tool be always sure of a safe and secure operating position especially
when using steps or a ladder;
Do not attempt to repair the tool;
Do not operate the tool with a damaged or excessively worn cutting device;
Always wear ear protection, goggle and helmet during operating;
Always ensure that all guards are fitted when using the tool. Never attempt to use an
incomplete tool or a tool with unauthorized modifications;
Always use two hands to operate the tool;
When transporting or storing the tool always fit the blade sheath.
Always be aware of your surroundings and stay alert for possible hazards that you may not
hear due to the noise of the tool;
Do not carry the tool with your hands on the switch unless the battery has been removed.
If you have not used a hedge trimmer before, preferably seek practical instruction by an
experienced user in addition to studying this manual.
Never touch the blades while the tool is running.
Never attempt to force the blades to come to a standstill.
Do not put the tool down until the blades have come to a complete standstill.
Regularly check the blades for damage and wear. Do not use the machine when the blades
are damaged.