EN
CORDLESS LEAF BLOWER
USER’S MANUAL
5
General power tool safety warnings
1. GENERAL POWER TOOL SAFETY WARNINGS
This device is suited solely for the blowing of light and dry materials such as leaves, garden waste, grass,
small branches, and small pieces of paper.
This appliance is intended for use on private properties only.
This product is not intended for commercial use. Generally acknowledged accident prevention regulations
and enclosed safety Instructions must be observed.
Only perform work described in these Instructions for use. Any other use Is Improper. The manufacturer will
not assume responsibility for damage resulting from such use.
WARNING!
Read and understand all instructions. Failure to follow the warnings and Instructions
may result in electric shock.fi re and/or serious injury. Save ail warnings and instructions
for future reference. The term „power tool“ in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools In explosive atmospheres, such as In the presence of fl ammable liquids, gases
or dust. Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock If your body Is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use
a power tool while you are tired or under the infl uence of drugs, alcohol or medication. A moment of
Inattention while operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool. Carrying power tools with your fi nger on the switch or
energising power tools that have the switch on Invites accidents.
Summary of Contents for FZF 70605-0
Page 1: ...FZF 70605 0 ...
Page 2: ...EN 2 FZF 70605 0 1 not included not included ...
Page 18: ......
