21
22
SR.NO.
DESCRIPTION
QTY.
1
FLAT DISC 14" X 3 MM (DISC SEED DRILL)
DISC SEED DRILL TYNE HUB
BEARING 6205-Z
INTERNAL CIRCLIP-55 MM
CSK BOLT M8X1.25X30
SPRING WASHER 8MM
HEX. NYLOCK NUT M8X1.25
1
2
1
3
1
4
1
5
4
6
4
7
4
ITEM CODE
10240117
01240004
10050158
10390153
10261036
10270001
10280027
DISC SUB ASSEMBLY (DISC SEED DRILL) (78550075)
DISC SUB ASSEMBLY
To Clean Out Seed, Fully Open
By Rotating Handle
To This Position.
Handle (Shown
In Highest Position)
Other Information About Seed Gun Setting
Seed Gun Settings
Each seed gun is equipped with a four-position gate. The highest handle position shown is for
small seeds, the second and third positions are for larger seeds. The forth position (Handle
rotated fully down below the bottom tab) sets the wide open to allow complete clean-out of
seed gun. Seed quantity is based on the handle being set in the highest position. Typically,
most seeds will use the highest handle position. If using larger seed and it is not discharging
properly, you can try using the other two handle positions.
IMPORTANT:
Most applications for this seeder require the handle be placed in the highest
position.
MAKE SURE
all handles are in the same position before seeding. Do Not set handles in the
fourth position and seed quantity adjustment lever to the widest open position with seed in the
box unless complete clean out is desired.
Fig-20
1
7
2
3
4
5
6