OPERATION INSTRUCTIONS
Operating the Tiller
1. Raise the Tiller Tines by making sure the Lift Arm is forward, then place the Tiller on level ground.
Figure 5 shows the Tiller in the towing position (non-tilling position).
2. Disengage the Tine Clutch Lever, lock the Limiting Plate with the wheels in the raised position,
then start the Engine following
the procedure in the Engine Owner’s Manual.
To Engage the Tines, push the Tine Clutch Lever. Adjust the depth of Tines by moving the Limiting
Plate and re-locking the Handle Rod Assembly. Figure 6 shows the Tiller in the operating (tilling)
position.
Figure 5
Figure 6
11
