Field Scout SC 900, Product Manual

Page: 20 / 28

20
The data is stored in comma-delimited text files. These
files can be opened with text-editing software (e.g. Micro-
soft Word) or spreadsheet software (e.g. Excel).
The first two lines of the data file give the logger’s name
and serial number. The third line indicates that latitude
and longitude are referenced to the 1984 World Geodetic
Survey datum. The fourth line shows the cone index unit
system. The fifth line shows the column headings for the
rest of the data file. Each row of data represents a meas-
urement profile.
Logging sessions are started and completed by turning the
meter on and off. The start of a logging session is indi-
cated by the data line “Logger Started”. If a GPS signal
was found at the start of a logger session a time stamp is
included on the “Logger Started” line.
Note: You must have meter firmware v. 8.2 or greater and
Field Scout software v. 4.8 or greater to generate the cone
size column.
Sample data showing results of data collected with and
without GPS activated. Note: GPS signal not found when
recording first three sample numbers
.
Data Management