Field Controls Trio Plus, User Manual

Page: 17 / 40

COMMON PROBLEMS AND SOLUTIONS
WARNING – Skin or eye damage may result from directly viewing the
light produced by the lamp in this apparatus. Always shutdown and
disconnect the power before replacing or servicing.
Replace lamps with Field Controls Trio Plus UV lamp replacement kit
Part Number # 602604500.
Replacement steps:
REPLACEMENT OF UVC LAMP
Step 5 Remove the new
Carbon Filter from its packaging
and place the new filter in the
direction of the arrow with the
tag pointing towards you.
Step 7 Place the bottom of
the pre-filter frame into the
slots on the bottom of the
appliance and press the top
towards the appliance until
the clasps click closed. Step 8 First slide the bottom
hooks of the front cover into the
air purifier slots in the direction of
2, then press the top towards the
air purifier in the direction of 1.
Step 6 Remove the packaging
on the new HEPA filter and
place in the direction of the
arrow with the tag pointing
towards you.
The If the power light is off, the Confirm the unit is
machine unit is not correctly plugged plugged in.Try unplug
does not in. Please confirm the plug and plug back in the unit.
turn on and socket connections
1. Turn the appliance off and unplug from power outlet.
2. Remove all the filters after opening front cover panel.
3. Remove the UVC lamps by rotating them 90 degrees.
4. Install new UVC lamps by inserting and rotating 90 degrees to lock in place.
5. Replace filters back into the air purifier.
6. Close front cover panel to complete installation
There is a problem with the Please check whether
Product power connection; the plug is inserted into
works The filter cover is not the socket and check
abnormally placed properly. On/Off button status;
Re-install the filters.
Fresh air The plastic package of the
cannot be new filter is not removed; Remove any packaging
delivered The air outlet of purified is from the filter.
from the air blocked by foreign matter.
outlet
smoothly
HEPA filters and activated carbon filters are best replaced every 3 to 6
months, depending on the use situation. High-efficiency HEPA filters,
activated carbon filters, photocatalyst filters, and pre-filters cannot be
washed.
Problem Possible Causes Remedial Action