Field Controls Healthy Home System Duo-2000 Manual Download Page 10

WARNING:

 

Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent eye damage 

or blindness.Never operate the Duo-2000 Air Purifying System out of the plenum. Avoid touching the glass portion of the lamp with your hands.

Page 10 of 12

CLEAN-UP OF BROKEN LAMPS

(see warnings on page 3 of this manual)
UV lamps contain a small amount of mercury, like a typical fl uorescent lamp. DO NOT touch any of the mercury 
with your bare hands.

1. While wearing disposable, non-absorbent protective gloves, carefully pick up the large pieces of glass 

with your hands.

2. Vacuum the entire area with a standard household vacuum cleaner ensuring the removal of all lamp 

material.

3.  Dispose of the pieces of glass, the vacuum cleaner bag, and the disposable gloves in a sealed garbage bag.
4. Check with your local waste management authority for local disposal or recycling requirements. 

According to the EPA's Universal Waste Rule, these types of lamps may be disposed of into household 
waste.

5. Wash hands, and remove and wash clothes for added safety measures.

Replacement Part Number

46636300

18” Lamp Assy Duo

625001003

120/240V Rep Ballast Assy

730118175

Carbon, Duo-2000

80213041175

Pro-Cell Honeycomb 4.125 x 17.625

P/N 46638600  09/18  Rev E

For replacement parts, contact Field Controls at:

Phone: 252-522-3031 • Fax: 252-522-0214

Email: sales@fi eldcontrols.com

REPLACEMENT PARTS LIST

Summary of Contents for Healthy Home System Duo-2000













Reviews: